Lattice Solutions

Everything you need to quickly and easily complete your design

Share This Result >

Narrow Your Results



Solution Type



Device Support






















Tags























































Providers





Clear All
  • iCEstick Evaluation Kit

    Board

    iCEstick Evaluation Kit

    A low-cost platform for evaluation and development with the iCE40 FPGA. Plus directly into a USB port for power and data communication.
    iCEstick Evaluation Kit
  • IceZero

    Board

    IceZero

    Low-cost general purpose platform for the RaspberryPi with 4 MBit SRAM and four 2 x 6 PMOD interfaces for 32 3.3V LVCMOS IOs. Powered/configured over the 2 x 20 Raspberry Pi header.
    IceZero
  • icoBoard

    Board

    icoBoard

    Pin-compatible with Raspberry Pi 2 - B. Contains an 8K LUT, 100 MHz Lattice FPGA, 8 MBit of SRAM. Programmable in Verilog by a complete open source FPGA toolchain.
    icoBoard
  • Infrared Remote Tx/Rx Reference Designs

    Reference Design

    Infrared Remote Tx/Rx Reference Designs

    Implements an interface to IR receive and/or IR transmit. This includes PWM (pulse width modulation) timing and protocol conversion to an SPI /I2C bus
    Infrared Remote Tx/Rx Reference Designs
  • RGB LED Reference Design

    Reference Design

    RGB LED Reference Design

    A complete RGB LED design that controls the color, blinking rate, brightness and breathing of an RGB LED.
    RGB LED Reference Design
  • Alhambra II board by Alhambra

    Board

    Alhambra II board by Alhambra

    Community-sourced board for iCE40HX1K by Alhambra Bits. Designed for expansion to a complete hardware ecosystem.
    Alhambra II board by Alhambra
  • iCE40HX1K FPGA Development Board

    Board

    iCE40HX1K FPGA Development Board

    A low-cost development board that interfaces to many expansion boards adding functionality like ADC/DAC, IrDA, VGA and more.
    iCE40HX1K FPGA Development Board
  • iCE40HX8K FPGA Development Board

    Board

    iCE40HX8K FPGA Development Board

    A low-cost development board that interfaces to many expansion boards adding functionality like ADC/DAC, IrDA, VGA and more.
    iCE40HX8K FPGA Development Board
  • TinyFPGA Bx

    Board

    TinyFPGA Bx

    A tiny low-cost development board for the iCE40LP8K FPGA, supported by a full open-source tool chain.
    TinyFPGA Bx
  • TL448K6D-VR System in Package for SteamVR Tracking

    Board

    TL448K6D-VR System in Package for SteamVR Tracking

    Contains all of the necessary processing power to create a SteamVR Tracked device in a 10mm by 16.32mm footprint.
    TL448K6D-VR System in Package for SteamVR Tracking
  • BlackIce-II by myStorm

    Reference Design

    BlackIce-II by myStorm

    This board has been prototyped, and is available as a Reference Design on GitHub and other open-source community forums. It has an on-board Arm Cortex M4 microcontroller and features PMOD, Arduino and RPi expansion headers.
    BlackIce-II by myStorm
  • iCE40-HX8K Breakout Board

    Board

    iCE40-HX8K Breakout Board

    Simple, low-cost board with generous IO access.
    iCE40-HX8K Breakout Board
  • CANmodule-III

    IP Core

    CANmodule-III

    Compliant to the international CAN standard defined in ISO 11898-1, interfaces to an AMBA 2 Advanced Peripheral Bus (APB)
    CANmodule-III
  • CANmodule-IIx

    IP Core

    CANmodule-IIx

    Fully functional CAN controller module that contains advanced message filtering, and receive and transmit buffers.
    CANmodule-IIx
  • iniCAN

    IP Core

    iniCAN

    Implements the low-level CAN protocol handling - complete data link layer, framer, transmit and receive control, error handling, error reporting and bit sync.
    iniCAN
  • SPI Master Controller

    Reference Design

    SPI Master Controller

    Implements a SPI Master Controller in VHDL and uses an iCE40™ ultra low density FPGA and can be targeted to other iCE40 family members.
    SPI Master Controller
  • Page 1 of 2
    First Previous
    1 2
    Next Last