• Home >
  • Lattice Solutions

Lattice Solutions

Everything you need to quickly and easily complete your design

Share This Result >

Narrow Your Results



Solution Type
Device Support
Tags
Providers
Clear All
  • ​​I/O Aggregation Over USB with CrossLinkU-NX Reference Design​

    Reference Design

    ​​I/O Aggregation Over USB with CrossLinkU-NX Reference Design​

    USB to IO Bridging Reference Design Create plug-and-play peripheral expansion on USB-enabled FPGA & signal protocol conversion from USB to I2C, SPI, & GPIO.
    CrossLink-NX 
    USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 
    ​​I/O Aggregation Over USB with CrossLinkU-NX Reference Design​
  • CrossLinkU-NX Evaluation Board

    Board

    CrossLinkU-NX Evaluation Board

    CrossLinkU-NX Evaluation Board is a platform for general purpose application development using CrossLinkU-NX device, the first FPGA with hard USB2/3 (5Gbps) interface.
    CrossLink-NX 
    USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 
    CrossLinkU-NX Evaluation Board
  • USB 2.0/3.2 IP Core

    IP Core

    USB 2.0/3.2 IP Core

    Lattice USB 2.0/3.2 IP Core provides a solution to interface with a USB host and can be targeted to the Lattice CrossLink-NX FPGA Devices.
    CrossLink-NX 
    USB, USB2, USB3, AHB, AHB-L, AHB-Lite, AXI, I2C, SPI, JTAG, LVDS, SLVS, FTDI 
    USB 2.0/3.2 IP Core
  • CrossLinkU-NX USB3 Vision Reference Design

    Reference Design

    CrossLinkU-NX USB3 Vision Reference Design

    A design provides a template for video streaming from camera sensor over USB using the USB hard IP in a CrossLinkU-NX device.
    CrossLink-NX 
    U3V, USB3, Vision 
  • USB3-GbE VIP IO Board

    Board

    USB3-GbE VIP IO Board

    Output board for Video Interface Platform (VIP) and Embedded Vision Development Kit - adds video over USB 3.0 and Gigabit Ethernet.
    CrossLink, ECP5 / ECP5-5G 
    Ethernet, USB3, Video Tx/Rx, VIP, Lattice mVision, Defense, Avionics 
    USB3-GbE VIP IO Board
  • ​​USB 3.2 Gen 1 Device Controller IP Core (USB32SF)​

    IP Core

    ​​USB 3.2 Gen 1 Device Controller IP Core (USB32SF)​

    This IP core solution uses the FPGA’s built-in transceiver for USB 3.2 and ULPI PHY for USB 2.0. It supports SuperSpeed, High Speed and Full Speed modes.
    CrossLink-NX, CertusPro-NX 
    ARM, RISC-V, Soft Processor, FMC, AHB, AHB-Lite, AXI, USB Type-C, USB3, Camera, Image Processing, MIPI 
    ​​USB 3.2 Gen 1 Device Controller IP Core (USB32SF)​
  • ​​tinyCLUNX33 System on Module​

    Board

    ​​tinyCLUNX33 System on Module​

    ​​1x1" production ready, tightly integrated System on Module using Lattice CrossLinkU-NX (LIFCL-33U) to significantly reduce customers Time to Market.​
    CrossLink-NX 
    Lattice sensAI, RISC-V, Soft Processor, Breakout, PWM, LED Control, HyperRAM, SRAM, USB3, Camera, JPEG, Video Aggregation 
    ​​tinyCLUNX33 System on Module​
  • Lattice USB3 Video Bridge Development Kit

    Board

    Lattice USB3 Video Bridge Development Kit

    Production-ready SuperSpeed USB3 Audio/Video Solution at 1080p60. Supports multiple video inputs - HDMI, SDI, CSI-2 - to USB3 video out.
    LatticeECP3 
    CSI-2, HDMI, LVDS Video, MIPI, SDI Video, USB3, Video Tx/Rx, Defense, Avionics 
    Lattice USB3 Video Bridge Development Kit
  • ​​USB 3.2 FMC Board​

    Board

    ​​USB 3.2 FMC Board​

    ​​USB 3.2 FMC Board is to validate USB 3.2 functionality with FPGA’s inbuilt serial transceivers. It has ULPI PHY chip to validate USB 2.0 functionality.​
    CrossLink-NX, CertusPro-NX 
    FMC, Data Compression, DSP, USB Type-C, USB3, Camera, Image Processing 
    ​​USB 3.2 FMC Board​
    • Page 1 of 1
    First Previous
    1
    		Next Last

    ABOUT LATTICE

    SALES

    SUPPORT

    FOLLOW