• Home >
  • Lattice Solutions

Lattice Solutions

Everything you need to quickly and easily complete your design

Share This Result >

Narrow Your Results



Solution Type
Device Support
Tags
Providers
Clear All
  • ​​USB 3.2 Gen 1 Device Controller IP Core (USB32SF)​

    IP Core

    ​​USB 3.2 Gen 1 Device Controller IP Core (USB32SF)​

    This IP core solution uses the FPGA’s built-in transceiver for USB 3.2 and ULPI PHY for USB 2.0. It supports SuperSpeed, High Speed and Full Speed modes.
    CrossLink-NX, CertusPro-NX 
    ARM, RISC-V, Soft Processor, FMC, AHB, AHB-Lite, AXI, USB Type-C, USB3, Camera, Image Processing, MIPI 
    ​​USB 3.2 Gen 1 Device Controller IP Core (USB32SF)​
  • MAS Educational Board CertusPro-NX

    Board

    MAS Educational Board CertusPro-NX

    Product dedicated to Lattice CertusPro™ -NX, featuring: LPDDR4 x32, Octal SPI 64Mbyte, PCIe x4 Gen 3, PMOD and PMOD+ LVDS, DSI and CSI Onboard Lattice Programmer with USBC and PCIe Power Supply.
    CertusPro-NX 
    Machine Learning/AI, RISC-V, PMOD, CAN, LCD panel, DDR Memories, PCIe, USB Type-C, CSI-2, Encryption 
    MAS Educational Board CertusPro-NX
  • Pico-Ice

    Board

    Pico-Ice

    The Pico-Ice is a small, low-cost board with the Raspberry Pi Pico processor (RP2040) and a Lattice Semiconductor iCE40UP5K FPGA.​
    iCE40 UltraPlus 
    Lattice sensAI, ARM, Soft Processor, PMOD, PWM, LED Control, Raspberry Pi, NOR Flash, SPI Flash, SRAM, USB Type-C 
    Pico-Ice
  • iCESugar by MuseLab

    Board

    iCESugar by MuseLab

    Designed by MuseLab, and available from multiple sources. Includes RGB LED, Type-C + Micro-USB, PMOD. Onboard ARM-based iCELink for debug and programming.
    iCE40 UltraPlus 
    Community Sourced, LED Control, USB Type-C, PMOD 
    iCESugar by MuseLab
  • ICE-V-Wireless-FPGA-Board

    Board

    ICE-V-Wireless-FPGA-Board

    The ICE-V Wireless FPGA board utilizes iCE40 UltraPlus with wireless support through an ESP32-C3-MINI-1 module with WiFi 4 and Bluetooth LE connectivity.
    iCE40 UltraPlus 
    PMOD, ADC/DAC, Bluetooth-BLE, GPIO Control, I2C, SPI, USB Type-C, WiFi, PSRAM, LiPo, ESP32 firmware 
    ICE-V-Wireless-FPGA-Board
  • ​​USB 3.2 FMC Board​

    Board

    ​​USB 3.2 FMC Board​

    ​​USB 3.2 FMC Board is to validate USB 3.2 functionality with FPGA’s inbuilt serial transceivers. It has ULPI PHY chip to validate USB 2.0 functionality.​
    CrossLink-NX, CertusPro-NX 
    FMC, Data Compression, DSP, USB Type-C, USB3, Camera, Image Processing 
    ​​USB 3.2 FMC Board​
    • Page 1 of 1
    First Previous
    1
    		Next Last

    ABOUT LATTICE

    SALES

    SUPPORT

    FOLLOW