Lattice Solutions

Everything you need to quickly and easily complete your design

Solution Type



Device Support







Tags

















Providers
  • MachXO3-9400 Development Board

    Board

    MachXO3-9400 Development Board

    General purpose evaluation and development for MachXO3, supporting hardware management demos with Lattice ASC plus Raspberry Pi and Arduino board connectors
    MachXO3-9400 Development Board
  • Power Sequencing with Fault Logging Demo

    Demo

    Power Sequencing with Fault Logging Demo

    Uses L-ASC10 to monitor, sequence four separate Power Planes from a central control point. Logs faults with timestamps. Expandable.
    Power Sequencing with Fault Logging Demo
  • ASC Bridge Board

    Board

    ASC Bridge Board

    Interface with multiple (1-3) L-ASC10 Evaluation boards for rapid prototyping, development and testing of Power Management tasks
    ASC Bridge Board
  • L-ASC10 Breakout Board

    Board

    L-ASC10 Breakout Board

    A versatile hardware platform for evaluating and designing with L-ASC10 devices. Connect and control with FPGAs via the ASC Bridge board.
    L-ASC10 Breakout Board
  • ispPAC-POWR607 Evaluation Board

    Board

    ispPAC-POWR607 Evaluation Board

    For evaluation and development with the isp-PAC-POWR607 device in a 32-QFN package
    ispPAC-POWR607 Evaluation Board
  • Power Management Bus

    Reference Design

    Power Management Bus

    Implements the Data Link Layer protocol of the Power Management Bus, conneting to a WISHBONE interface
    Power Management Bus
  • Platform Manager 2 Development Kit

    Board

    Platform Manager 2 Development Kit

    For evaluation and development with Platform Manager 2 and L-ASC10 devices.
    Platform Manager 2 Development Kit
  • Platform Manager Utility Function Core IP

    IP Core

    Platform Manager Utility Function Core IP

    Supports Fault Logging and Enhanced Closed-loop Trim power management functions.
    Platform Manager Utility Function Core IP
  • Supervisor, WDT & Reset Generation with ProcessorPM

    Reference Design

    Supervisor, WDT & Reset Generation with ProcessorPM

    Implements two Power Management reset generation and watchdog timer, controlled by six analog voltage monitor (VMON) inputs and input/configuration pins.
    Supervisor, WDT & Reset Generation with ProcessorPM
  • POWR1014A Breakout Board

    Board

    POWR1014A Breakout Board

    A simple low-cost board that provides complete I/O access to the Power Manager II (POWR1014A)+LEDs, Prototyping area and more.
    POWR1014A Breakout Board
  • POWR607/6AT6 Evaluation Board

    Board

    POWR607/6AT6 Evaluation Board

    For evaluation and development with both POWR607 and POWR6AT6.
    POWR607/6AT6 Evaluation Board
  • Circuit Board Fault Monitoring and Logging

    Reference Design

    Circuit Board Fault Monitoring and Logging

    Records the supply fault condition in non-volatile memory so the fault(s) can read back at a later time
    Circuit Board Fault Monitoring and Logging
  • Power Manager II Fault Logger

    Reference Design

    Power Manager II Fault Logger

    Records the supply fault condition in non-volatile memory so the fault(s) can read back at some later time
    Power Manager II Fault Logger
  • Power Supply Fault Detection

    Reference Design

    Power Supply Fault Detection

    Records the supply fault condition in non-volatile memory so the fault(s) can read back at a later time
    Power Supply Fault Detection
  • Redundant Power Supply Management

    Reference Design

    Redundant Power Supply Management

    Uses a Lattice Power Manager II device to achieve Redundant Power Supply Management using the power supply OR’ing technique
    Redundant Power Supply Management
  • AMC Power Module Management

    Reference Design

    AMC Power Module Management

    Describes the use of a Lattice Power Manager II device as a Payload Power Management Coprocessor in an Advanced Mezzanine Card (AMC) system
    AMC Power Module Management
  • ADC Temperature Measurement Readout

    Reference Design

    ADC Temperature Measurement Readout

    Demonstrates the input of ambient temperature using an input voltage developed using an external resistor/thermistor and interface to the on-chip ADC using I2C
    ADC Temperature Measurement Readout
  • 12V Hot Swap Control

    Reference Design

    12V Hot Swap Control

    Demonstrates how a Power Manager II ispPAC-POWR1220AT8 can be used to implement the functions required for +12V hot-swap applications
    12V Hot Swap Control
  • 5V & 3.3V Hot Swap Controller

    Reference Design

    5V & 3.3V Hot Swap Controller

    Implements a hot swap controller design within a Power Manager II mixed-signal PLD
    5V & 3.3V Hot Swap Controller
  • PAC-POWR1220AT8 Development Kit

    Board

    PAC-POWR1220AT8 Development Kit

    No longer available - for reference only. Basic evaluation and prototyping with the ispPAC-POWR1220AT8 device + 100-pin TQFP package + Pads for user I/O, I2C...
    PAC-POWR1220AT8 Development Kit
  • Page 1 of 2
    First Previous
    1 2
    Next Last
    Like most websites, we use cookies and similar technologies to enhance your user experience. We also allow third parties to place cookies on our website. By continuing to use this website you consent to the use of cookies as described in our Cookie Policy.