Lattice Solutions

Everything you need to quickly and easily complete your design

Solution Type



Device Support









Tags



























































Providers
  • CrossLink-NX Evaluation Board

    Board

    CrossLink-NX Evaluation Board

    For general evaluation and development with CrossLink-NX, includes many flexible interfaces such as FMC and PMOD with generous device IO access
    CrossLink-NX Evaluation Board
  • Object Counting

    Reference Design

    Object Counting

    An example object counting application based on the Lattice sensAI stack. Includes SPI, DDR IP blocks, ISP engine, 8 CNN engines and a counting / overlay engine
    Object Counting
  • CNN Plus Accelerator IP

    IP Core

    CNN Plus Accelerator IP

    Implement Ultra-Low Power AI solutions with CNNs. Configure up to 16-bit widths. Works with Lattice Neural Network Compiler software tool.
    CNN Plus Accelerator IP
  • CSI-2/DSI D-PHY Receiver

    IP Core

    CSI-2/DSI D-PHY Receiver

    Modular MIPI/D-PHY IP - PHY for receiving MIPI CSI-2/DSI Data for further processing. Supports up to 4 MIPI lanes to 10Gb/s
    CSI-2/DSI D-PHY Receiver
  • FPD-LINK Receiver

    IP Core

    FPD-LINK Receiver

    Modular MIPI/D-PHY IP - Converts FPD-LINK Video Streams to Pixel Clock Domain
    FPD-LINK Receiver
  • FPD-LINK Transmitter

    IP Core

    FPD-LINK Transmitter

    Modular MIPI/D-PHY IP - Convert Pixel Data Streams to an FPD-LINK Video Stream
    FPD-LINK Transmitter
  • SubLVDS Image Sensor Receiver

    IP Core

    SubLVDS Image Sensor Receiver

    Modular MIPI/D-PHY IP - Converts SubLVDS Image Sensor Video Stream to Pixel Clock Domain
    SubLVDS Image Sensor Receiver
  • MIPI CSI-2 Virtual Channel Aggregation

    Reference Design

  • 4 Input to 1 Output MIPI CSI-2 Image Aggregation Demo

    Demo

  • I3C Master IP Core

    IP Core

    I3C Master IP Core

    Bus controller following the MIPI I3C specification. Up to 12.5 MHz Push-Pull, legacy I2C support, Multi-master capability, In-Band Interrupt, Hot-join and more
    I3C Master IP Core
  • I3C Slave IP Core

    IP Core

    I3C Slave IP Core

    Interfaces to the MIPI I3C specification. Up to 12.5 MHz Push-Pull, legacy I2C support, Multi-master capability, In-Band Interrupt, Hot-join and more
    I3C Slave IP Core
  • Human Counting

    Demo

    Human Counting

    Human upper-body detection and counting demonstration utilizes Lattice’s ECP5 FPGA and a Convolutional Neural Network (CNN) acceleration engine
    Human Counting
  • Tri-Speed Ethernet MAC Core IP

    IP Core

    Tri-Speed Ethernet MAC Core IP

    Transmits and receives data between a host processor and an Ethernet network. IEEE 802.3 compliant. Supports 10/100/1000 operation.
    Tri-Speed Ethernet MAC Core IP
  • GPIO IP Core

    IP Core

    GPIO IP Core

    Detects and controls GPIOs via Lattice Memory Mapped Interface (LMMI) or Advanced Peripheral Bus Interface (APB).
    GPIO IP Core
  • SPI Master IP Core

    IP Core

    SPI Master IP Core

    Communicates with external SPI slave devices. Configurable data width, FIFO Tx/Rx depth, polarity, clocking modes and memory interface.
    SPI Master IP Core
  • Page 1 of 2
    First Previous
    1 2
    Next Last
    Like most websites, we use cookies and similar technologies to enhance your user experience. We also allow third parties to place cookies on our website. By continuing to use this website you consent to the use of cookies as described in our Cookie Policy.